Beam Sensor×セキュリティハウス - メーカー・企業と製品の一覧

Infrared Beam Switch, Opposing Type, for 6m Cold Climate Specification, DS-6NY

It can be easily installed with a super compact controller and a detachable connection cable.

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting part and the light-receiving part can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off during detection)

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared Beam Switch Standard Specification for 10m DS-10TN

The controller unit is miniaturized, and the wire can be freely cut. By adopting a scanning method, it prevents mutual interference between the upper and lower layers.

■Realization of compact controller Achieved a compact controller size of W: 45mm H: 120mm D: 29mm. It does not limit the installation location even within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial use as a single beam and the option to add sensor heads later to use it as a double beam if necessary. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, it is not necessary to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared Beam Switch Reflective Type Standard Specification for 4m DS-4RN

It can be easily installed with a super compact controller and a detachable connection cable.

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ● Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ● Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that allows for optimal sensitivity adjustment based on the installation distance. ■User-friendly design ● Highly reliable design that is hardly affected by external light disturbances such as sunlight ● Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared Beam Switch Reflective Type Standard Specification for 4m DS-4RNY

It can be easily installed with a super compact controller and a detachable connection cable.

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ● Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ● Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Equipped with sensitivity volume It features a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ● High-reliability design that is hardly affected by external light disturbances such as sunlight ● Operation indicator light for convenient operation confirmation (Green LED: always on, turns off during detection)

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared Beam Switch for 4m Cold Climate Specification DS-4RTNY

The controller section is miniaturized, and the wires can be freely cut. It adopts a scanning method to prevent mutual interference between the upper and lower tiers.

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed anywhere within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and the option to add a sensor head later to use it as a double beam if needed. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Slim sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared Beam Switch Opposing Type Standard Specification for 10m DS-10N

It can be easily installed with a super compact controller and a detachable connection cable.

■Realization of compact controller This is a small controller with dimensions of W: 45mm H: 94mm D: 29mm, making it easy to install inside the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut. ●Cable length: 5m (for 6m DS-6N series, for 4m DS-4RN series) ●Cable length: 10m (for 10m DS-10N series) ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Moreover, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■User-friendly design ●High-reliability design that is hardly affected by external light disturbances such as sunlight ●Convenient operation indicator light for operation confirmation (Green LED: always on, turns off when detecting)

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared Beam Switch Standard Specification for 6m DS-6TN

The controller section is miniaturized, and the wire can be freely cut. By adopting a scanning method, it prevents mutual interference between the upper and lower layers.

■Realization of compact controller Achieved miniaturization of the controller with dimensions W: 45mm H: 120mm D: 29mm. It does not require a specific installation location within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine. ■Can also be used as a single beam It can be used as a single beam initially, and if necessary, additional sensor heads can be added to use it as a double beam. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Thin sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared Beam Switch for 6m Cold Climate Specification DS-6TNY

The controller unit has been miniaturized, and the wires can be freely cut. By adopting a scanning method, mutual interference between the upper and lower sections is prevented.

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as was done traditionally. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam and later expansion to a double beam by adding a sensor head if needed. ■Adoption of scanning method The adoption of a scanning method ensures there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Built-in sensitivity volume It has a built-in sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared Beam Switch for 10m Cold Climate Specification DS-10TNY

The controller section is miniaturized, and the wires can be freely cut. By adopting a scanning method, mutual interference between the upper and lower layers is prevented.

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed in various locations within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam, with the option to add sensor heads later to use it as a double beam if needed. ■Adoption of scanning method The adoption of a scanning method ensures there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the upper and lower light emitters and receivers during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Slim sensor head can be installed with one touch The sensor head uses a one-touch installation type that can be installed simply by drilling a hole (Φ12mm) and pushing it in. Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Infrared Beam Switch Standard Specification for 4m DS-4RTN

The controller unit has been miniaturized, and the wires can be freely cut. By adopting a scanning method, it prevents mutual interference between the upper and lower tiers.

■Realization of compact controller Achieved a compact controller with dimensions W: 45mm H: 120mm D: 29mm. It can be installed anywhere within the door engine. ■Connection cables can be freely cut Depending on the installation conditions, both the light-emitting and light-receiving parts can have their connection cables freely cut, eliminating the need to bundle them inside the door engine as before. ■Can be used as a single beam It can also be used as a single beam, allowing for initial installation as a single beam, with the option to add a sensor head later to use it as a double beam if needed. ■Adoption of scanning method By adopting a scanning method, there is no mutual interference between the upper and lower sections. Therefore, there is no need to interchange the light emitters and receivers of the upper and lower sections during installation. ■Equipped with sensitivity volume It is equipped with a sensitivity adjustment volume that can be adjusted to the optimal sensitivity according to the installation distance. ■Slim sensor head can be installed with one touch The sensor head adopts a one-touch installation type that can be installed simply by pushing it into a pre-drilled hole (Φ12mm). Additionally, the diameter of the ring cover has been increased from the conventional 12mm to 15mm, improving workability.

企業：セキュリティハウス
価格：Other

Security Sensor Systems
Security devices

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Beam Sensor×セキュリティハウス - メーカー・企業と製品の一覧

Beam Sensorの製品一覧